Year Achivements / Landmarks


  • YEAR 1978 :- Condensate recovery system with water preheater from boiler waste gases. Development of Indegenous Recuperator.

  • YEAR 1979 :- Conversion of Oil Fired Boiler to Coal cum Wood Firing. Designing of 4-5 tonnes per hour BRHF.

  • YEAR 1984 :- Supplied 12 BRHFs to one forging plant in Gujrat, with all new concepts. Achieving 30% savings.

  • YEAR 1985 :- Retrofitted a 100 sq. meter surface area for VISC, Bhadrawati, Karnataka with indigenous materials and designs.
    Introduction of IIP-ENCON film burner, which is an icon in international industry now.

  • YEAR 1986 :- Constructed one-third super structure area at RCF, Kapurthala. Project directly surveillance of Hon. Rajiv Gandhi.

  • YEAR 1989 :- First Indegenous Recuperator Ladle with engineers of Mukand Ltd, Bombay. Step wise improvements resulted in 75% savings.

  • YEAR 1991 :- First BRHF supplied on turnkey basis to Kenya with new concept of Ceramic Fibre Lining.

  • YEAR 1992 :- Introduction of Mono Block Pressure Jet Burners in non-ferrous melting & other applications.

  • YEAR 1993 :- Constructed largest single span bridge in the country over River Chennab. Total job was completed in 6 months.
    Introduction of Hydraulic lifting and lowering mechanism for 90 tonne ladle heating station.

  • YEAR 1994 :- Major breakthrough in Aluminium melting technology by introducing Ceramic Fibre Lining & Mono Block Burner. Resulted in 95% saving in Electrical energy & 30% in oil consumption.

  • YEAR 1995 :- Advent of rationalising the use of energy- Converted electrical heating to indirect oil firing.

  • YEAR 1996 :- Modernised and redesigned a 45 TPH / BRHF at Tata SSL, Tarapore on a modest investment of $150,000, they are saving $100,000 per month.

  • YEAR 1999 :- Won the first prize for "Introducing the Best Technology" during Tech Mart at IITF.

  • YEAR 2000 :- Development of Indegenous Industrial gas burner by our R&D Centre. Project sponsored by Ministry of Science & Technology and GAIL, in partnership with IIP, achieved savings upto 16% in Industrial Gas Burners.

  • YEAR 2001 :- ISUZU commercial vehicle coming through our ovens.

  • YEAR 2002 :- Recuperator exported to Jordan for 60 tons/hr walking Beam Billet Reheating Furnaces. Retrofitting of the Recuperator resulted in 3% more efficiency.

  • YEAR 2003 :- Toyota-Prado out of our Oven. Won the "EXCELLENCE IN TECHNOLOGY" from CII at IETF.

  • YEAR 2005 :- 7 Meter high oven designed and manufactured by ENCON for Areva (Order has already been repeated thrice).

  • YEAR 2006 :- Advent of Raycon system to dry patch up line in induction furnaces. Coal Gasifier supplied to Dhiman Iron & Steel Industries Ltd. Sand Dryer supplied to Tirath Alloys Ltd.

  • YEAR 2007 :- 160 ft long conveyrised HYBRID oven (Solar- Gas-Electric) for medicine drying. Tundish Pre-heater supplied to DANIELI Engineering India Ltd.

  • YEAR 2008 :- Designed, manufactured and Supplied Horizontal Ladle Preheater, Vertical Ladle Preheater (180 Ton), Launder Preheater and vessel preheater to Bhushan Steel for their SMS -II plant at Angul, Orrisa.
    Designed, manufactured and Supplied, Three stand Tundish preheater and dryer for Bhillai steel plant, The burners of these Tundishes have been developed in-house and our is energized by Coke Oven Gas.
    Designed, manufactured and Supplied an oven energized by Radheat gas heating element to Vijay Industry for an annealing furnace, the working temperature of the oven is 550 C

  • YEAR 2009 :- Designed, manufactured and Supplied 14 oven to Areva T&D. The tallest oven supplied was 9 meter high.
    Retrofitted a 35 Ton/hr, Billet reheating furnace for ISWP (A subsidy of Tata Steel), The Fuel consumption has come down to 32.6 Ltr/Ton (previously 45 ltr/ton) of steel produced. Scaling is down to 1% (previously 1.5 to 2 %) There has been no failure in the furnace for the last 2 year the furnace has been operational. (previously the bull nose had to be repaired every 6 months) The furnace is constantly producing steel at the rate of 35 Ton/hr.

  • YEAR 2010 :- Designed, manufactured and Supplied 7 strand Tundish preheater, Tundish dryer and Nozzle Preheater for CCM 1, 2 & 3 to Vizag Steel Plant for there expansion project
    Designed, manufactured and Supplied an oven energized by Radheat gas heating element to Polycab for an annealing furnace, the working temperature of the oven is 450 C
    Designed, manufactured and Supplied core baking oven energized by Radheat gas heating element supplied to TATA motors Jamshedpur.